NAMCO CASINO WINNER, Operator'S Manual

Page: 80 / 216

Page 80
6-6-7 Andon Measurement Mode
1. Select “ANDON MEASUREMENT MODE” on the menu screen and press
the Enter switch. The following screen is displayed.
2. Operate the Select switch Up or Down to select an item. The selected item
is displayed in red.
3. Pressing the Enter switch changes the indication to “ON” and executes the
selected test..
4. Pressing the Enter swich again changes the indication to “OFF” and stops
the test.
5. After the test has been completed select “EXIT” and press the Enter switch
to return to the Menu screen.
(a) Turns the wheel rotation/stop operation ON/OFF. Displays the operation count.
(b) Displays the stopping counts of numbers, 1 thru 8.
(c) Clears the disc operation counts and stopping counts. When the Enter switch is
pressed, the display prompts for the input “YES” or “NO”.
NO (Data not cleared).
YES (Clears data).
Note: When WHEEL TEST is set to ON, the Andon Assy repeats wheel rotation/stop
operations 100 times and then automatically stops.
SELECT SW:CHOOSE ENTER SW:ENTER
ANDON MEASURMENT MODE
(a)
WHEEL TEST OFF O
POSITION-1 0
POSITION-2 0
POSITION-3 0
POSITION-4 0
POSITION-5 0
POSITION-6 0
POSITION-7 0
POSITION-8 0
COUNT CLEAR
EXIT
(b)
(c)