Page 78
It is recommended to measure the payout rate by using this mode following
installation or any changes to the playfield, or levelling of the machine.
The payout rate may change suddenly in a new machine due to wearing-in, caused
by coins, in the initial period of operation and the natural stacking of coins on the
playfield. To maximise income, it is very important that following the installation of
this game, the payout rate is checked regularly, and when necessary adjusted.
Even after the game has been operating for some time, it is advisable to regularly
check and adjust the payout rate as the following can all cause the payout rate to
change.
Coin Factors
Coin diameter, coin thickness, coin weight and coin
surface patterns.
Environmental Factors
Temperature, humidity and the level of the machine.
Age Related Factors
Dirtiness of Coins, dirtiness of the Playfield and
scratches to the Playfield.
Procedures for Field Payout Rate Measurment
Procedure 1 (preparing the measurement conditions)
1.
Remove all coins from the playfield.
2.
Add sufficient coins to the Coin Hopper (JP).
3.
Make sure that the Payout Solenoid is turned off.
4.
Clear the count for Coin Hopper (JP).
5.
Turn the Coin Hopper (JP) on. The Coin Hopper (JP) stops automatically
after it has discharged 1000 coins (approx 18 minutes)
6.
Ensure that the coins are distributed evenly on the playfield so that the
measurement can be performed properly.
Procedure 2 (preparing for measurement)
1.
Add sufficient coins to the Coin Hopper (JP).
2.
Turn the Payout Solenoid ON so coins that fall from the front edge are sent
to the coin tray.
3.
Turn the Coin Hopper (JP) on. The Coin Hopper (JP) stops automatically
after it has discharged 1000 coins (approx18 minutes)
*If the Coin Hopper (JP) becomes empty before discharging 1000 coins, it
stops automatically to protect the hopper motor from damage. Add coins
and turn the hopper on again.
Summary of Contents for CASINO WINNER
