
SHOUT ts User Guide Version B
Document Number: 451-92854-001B
39 of 62
Figure 19: Geofences Enabled/Disabled
The
Geofences
menu limits you to a just few options including: (1) browsing a list of fences
loaded into the device through SatTerm, (2) viewing the map of each fence and its type of
notification (arrival or departure), and (3) enabling/disabling a fence. Enter other geofence
features through SatTerm.
When a fence or fences are enabled, the Geofences symbol
at the top of the screen
changes from dimmed gray to bright white. The SHOUT ts immediately checks the GPS
receiver to determine whether the device is inside an enabled fence. If the SHOUT ts is
inside an enabled fence, the
Geofences
symbol turns green and the fence label also turns
green with the word
Active
attached to it. When a fence(s) is enabled and the SHOUT ts
sleeps, the status LED
flashes once every five seconds. You can turn it off during sleep
to reduce power consumption by using the
Settings
>
LED
menu.
Enable/Disable
a fence
Enabled fences
Labels are
dimmed on
fences that are
disabled