SHOUT ts User Guide Version B
Document Number: 451-92854-001B
22 of 62
3
H
OME
S
CREEN
1.
Immediately after turning on, press the unlock bar located at the bottom of the
screen.
Note:
A delay in displaying time and date is normal because the unit has to check
its internal clock against the GPS receiver.
2.
Enter a PIN if the device is set up with password protection.
Note:
NAL Research ships the SHOUT ts without password protection. However, if
the Personal Identification Number (PIN) is factory-set, it should be 1111.
3.
The home screen appears. Device status symbols are displayed along the top three
lines of the home screen. Some symbols do not appear until an event is initiated,
such as sending or receiving a message.
Figure 9: Home Screen