NAL Research Corporation (TN2012-02-V1.0)
36
SIM PUK2
A3LA-RS is waiting for SIM PUK2 to be given (because SIM PIN2 is
blocked).
*Note:
The response “SIM PIN2” is somewhat misleading, because it indicates one of three
possible scenarios:
1.
PIN1 has already been successfully entered (thus equivalent to the READY
response).
2.
No PIN1 is required (thus equivalent to the READY response).
3.
The A3LA-rs is waiting for PIN2 (used to access Fixed Dialing settings and other
subscription-based features).
In any of these three cases, the A3LA-RS should be available to place and receive calls.
Note:
+CPIN is closely related to +CLCK and +CPWD. See these commands for additional
information.
A.8.49 +CPMS – Select Preferred SMS Message Storage
Set Command:
+CPMS=<mem1>[, <mem2>[,<mem3>]]
Set command selects memory storages <mem1>, <mem2> and <mem3>. <mem1> is the
memory from which messages are read and deleted; <mem2> is the memory to which writing
and sending operations are made; <mem3> is the memory to which received SMS messages
are to be stored. If a chosen storage is not appropriate for the A3LA-RS, final result code +CMS
ERROR: <cms_err> is returned.
Valid values for <mem1>, <mem2> and <mem3> are:
"SM" SIM message storage
Response is in the form:
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>
where <used1>: number of messages currently in <mem1>
<total1>: total number of message locations in <mem1>
<used2>: number of messages currently in <mem2>
<total2>: total number of message locations in <mem2>
<used3>: number of messages currently in <mem3>
<total3>: total number of message locations in <mem3>
Read Command:
+CPMS?
Read command returns the current storage selected, usage and capacity. Response is in the
form:
+CPMS: <mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,<mem3>,<used3>,
<total3>
Test Command:
+CPMS=?
Test command returns lists of memory storages supported by the A3LA-RS. Response is in the
form:
+CPMS: (list of supported <mem1>s),(list of supported <mem2>s), (list of supported
<mem3>s)