Nakayama PRO NZ1100, Instructions Manual

Page: 5 / 12

EN
WWW.NIKOLAOUTOOLS.GR
5
Protec ve equipment Wear
1 Protec ve helmet Recommended
2 Hearing protec on Recommended
3 Safety goggles Mandatory
4 Protec ve gloves Mandatory
5 An -slip work boots Recommended
MARKINGS
‘’Markings’’ are defi ned as all signs and inscrip ons iden fying the type of machinery or component fi ed by the manufacturer of the machinery or
component.
The machinery has been designed with all safety measures in order to protect the operator. However, a number of hazards s ll exist which are indicated on
the machine by markings. These markings, shown below, highlight the hazards.
The machine must be accompanied by all safety chains, a sign direc ng any vehicles to move slowly, transport lights and refl ectors.
Keep all markings, inscrip ons and lights clean and replace immediately if damaged or destroyed.
1- Read the user instruc ons.
2- Always wear protec ve goggles.
3- Wearing protec ve gloves is mandatory.
4- Risk of burns(motor).
5- Conduc ve materials. Keep away from any power sources.
6- Do not expose the machine to rain.
MAINTENANCE - REPAIR AND STORAGE
The maintenance and repair of the machine must be carried out only by responsible persons properly trained in its opera on. A trained person
is defi ned as a person who is suffi
ciently informed or supervised by qualifi ed personnel and is thus able to avoid the hazards which may arise from the
opera on of the machine. If the machine does not operate properly due to incorrect maintenance and repair, the machine’s warranty will be voided.
Never operate an Olive Harves ng Machine that is damaged, incorrectly adjusted or in-correctly assembled. Follow the manufacturer’s maintenance
and repair instruc ons.
Use only genuine replacement parks made by the manufacturer. Use of other materials not approved by the manufacturer may cause problems in the
opera on of the machine.
Carry out maintenance and repair work only when the machine is switched off . For any repair and maintenance work, contact repair centres approved
by the manufacturer.
The carbon brushes last approximately 800 hours of opera on, a er which they need to be replaced.
The reducer gears, the head angular gears and the internal bearing bushes in the pipe of the Olive Harves ng Machine need lubrica on on a yearly basis.
Keep the motor ven la on holes clean and unobstructed.