IOM-EZVAVINST
Date: 10-2016
Supersedes: 7-2016
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
Page 46 of 48
Installation and Operation Manual
●
EZvav Digital Controls
Table 9–5 Binary value objects
Object
Name
Description
BV1
NEED AHU
Need For AHU
BV2
NEED COLDER SPLY
Need For Colder Air Supply
BV3
NEED MORE STATIC
Need For AHU
BV4
LOCAL OVRD
Local Override Mode
BV5
MOTION OVRD
Motion Override Mode
BV6
MOTION SENSOR
Motion Sensor (Wall Stat)
BV7
NEED HOTTER SPLY
Need For Hotter Air Supply
BV8
CHANGE OVER MODE
SAT Changeover Mode
BV9
DAT LIMITING
Discharge Air Temp Limiting
BV10
CLOCKWISE CLOSE
Clockwise Close
BV11
AUTO OCCUPANCY
Auto Occupancy Detection
BV12
BALANCE MODE
Balance Mode
BV13
DAT SENSOR
DAT Sensor Present
BV14
PRI BAL TRIGGER
Primary Balance Trigger
Table 9–6 Multistate value objects
Object
Name
Description
MSV1
OCCUPIED MODE
Occupied Mode
MSV2
FAN CONFIG
Fantype Configuration
MSV3
REHEAT
Reheat Type
MSV6
WALL SENSOR
Multi-state Value #6
Loop objects
BACnet PID loops are used for modulating the damper and controlling reheat.
Table 9–7 PID control loop objects
Object
Name
Description
LOOP1
CL LOOP
Cooling Loop
LOOP2
HT LOOP
Heating Loop
LOOP3
DAT Loop
Discharge Air Temp Loop
