Page | 31
In Spark Color 2™ a new Saber Configuration menu is available. To access this menu, when in the idle mode hold
down the aux button while the saber is pointing down. From here the two configuration modes can be accessed,
along with jumping back into the main idle mode of Spark Color 2™.
Once inside the menu the following interaction is possible.
Entry
Label
Action
Description
Aux Button
AUX +/-
Press
Advances to the next mode. The three possible modes are
Color Editor, Motion Editor, and Spark Color 2™ (main
firmware).
Main Button
MAIN +/-
Press/Latch
Enter the current mode.
6.5.
COLOR EDITOR
The Color Editor is an exciting new mode that allows editing of all the colors for every font on the saber. This
allows easy adjusting of colors selected from the Config Editor, and it even allows completely swapping the colors
without having to remove the SD card!
6.5.1.
COLOR EDITOR MENU
The color editor has a menu similar to the menu in Igniter™. This menu is used to navigate the fonts to select the
one to edit.
Entry
Label
Action
Description
Aux Button
AUX +/-
Press
Advances to the next color set.
Main Button
MAIN +/-
Press/Latch
This button will activate the saber for editing.
Aux Button
AUX +/-
Hold
Plays the instructions.
Aux Button
AUX +/-
Hold + point
saber down
Returns to the Saber Configuration menu.
6.5.2.
COLOR EDITOR EDITING
Once a font is selected the Color Editor is in editing mode for that font. From here all the changes can be made.
Entry
Label
Action
Description
Aux Button
AUX +/-
Press
Increments/decrements the current color value by 10.
Aux Button
AUX +/-
Hold
Changes between incrementing and decrementing.
Swing saber
NA
Swing + hold
aux button
Change the action being edited between: Blade, Clash, and
Blast.
Rotate saber
NA
Rotate
Rotating the saber will change between the colors blue,
green, and red.
Hit saber/Blade CS
Clash
Increments/decrements the current color by 1.
Main Button
MAIN+/-
Hold/Unlatch Holding or unlatching the main button will cause the
retraction sound to play and all changes made to this font will
be saved to disk.
6.6.
MOTION EDITOR