Page | 20
Figure 15 – Delete the existing font by selecting all the files, then hold control and uncheck ‘accent.ini’, ‘config.ini’, and ‘backup’ if it is
present. Then the selected files font.wav, multi.wav, and the wav folders can be deleted or cut and pasted into a backup location.
After the wav files are removed and all that is left is the config files and backup folder, you can copy in all the new
wav files from a new font. You can find these from online saber sound websites, and there are some free ones
available from my website as well:
http://SaberIgniter.com/fonts.aspx
.
Once the files are copied, then either open the font in the config editor, or if the config editor was already opened
to this font, simply switch back to the config editor, and it will auto-sync the font numbers from disk, and it will
auto-convert them to 22050Hz, mono with appropriate headers!