You may operate the T 567 from its front panel or via the BR 2 remote
control. Since the remote control will be the primary controller for most
cases, we will focus on remote-controlled operations. Be sure also to read
the section, “IDENTIFICATION OF CONTROLS - FRONT PANEL”.
USING THE HOME MENU
From the Home Menu screen, you can access the Setup menu as well as
select desired media for playback. If the Home Menu does not appear,
check your applicable video connections.
1
Press [HOME] and the Home Menu appears.
2
Use [
A/S
] keys to select through the following menu options - Movie,
Music, Photo and Setup.
3
Press [ENTER] to select desired menu option.
DISPLAY THE T 567 SETUP MENU
The Setup Menu allows one to customize the operation of the T 567. If the
factory defaults do not suit your taste, you will need to use the setup menu
to configure the T 567 yourself.
Press the BR 2’s [HOME] button and then select “Setup” for the Setup Menu
OSD to appear. With the use of the BR 2’s navigation buttons, you may
select various menus.
NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES
To navigate through the Setup Menu OSD options, please do the following
using the BR 2 remote control:
•
Use [
D/F
] keys to move up or down the menu selections.
•
Press [
A/S
] to move backward or forward a menu window.
•
Use [
D/F
] keys to select through the options of a particular menu
item.
•
Press [ENTER] to select a desired setting/selection.
•
Press [RTN] to exit the Setup menu.
DISPLAY DISC OSD
You can display the general disc playback status on the TV screen. Some
items can be changed using the menu. To use the on-screen display
1
Press the BR 2’s [DISP] during playback.
2
Press [
D/F
] to select an item. The selected item is highlighted.
3
Key-in the desired the number button, press [
A/S
] or [ENTER] as
applicable.
NOTES
•
The display feature may not be available for all disc media and is media
dependent.
•
Display disc OSD does not apply to audio only discs like CD and MP3/
WMA/PHOTO files as they are already presented in their respective menu
screens.
•
If no button is pressed for about 10 seconds, the on-screen display
disappears.
DISPLAY SETUP MENU
TV ASPECT RATIO
Set TV ASPECT RATIO to select a picture size matching the aspect ratio of
your TV/Monitor.
Select “4:3 Letter Box” or “4:3 Pan Scan” when a standard 4:3 TV is connected.
4:3 Letter Box:
Displays a wide picture with bands on the upper and
lower portions of the screen.
4:3 Pan Scan:
Automatically displays the wide picture on the entire
screen and cuts off the portions that do not fit.
Select “16:9 Original” or “16:9 Full” when a 16:9 wide TV is connected.
16:9 Original:
Select when a 16:9 wide TV is connected. The 4:3 picture
is displayed with an original 4:3 aspect ratio, with black bars appearing
at the left and right sides.
16:9 Full:
Select when 16:9 wide TV is connected. The 4:3 picture is
adjusted horizontally (in a linear proportion) to fill the entire screen.
NOTE
“4:3 Letter Box” or “4:3 Pan Scan” are not selectable when the resolution
is set to higher that 480i/480p (or 576i/576p).
OPERATION
USING THE T 567
12
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
