Nacra 500 MK2, Assembly Manual

Page: 30 / 112

30 .
3.1.
Main halyard
2.
thread the main halyard through the middle sheave in the
mastbase. Knot a figure 8 knot at the bottom of the mast.
5. At the top of the mast: take the knot out. Feed the halyard
through both eyelets of the hook. Guide the line around
the mast sheeve.
6.
Knot the other end of the main halyard line with a figure 8
knot to the eyelet on the main halyard ring. Tie everything
temporarily to the mast.
Make sure the line goes through both eyelets of the
main halyard swivel hook!
30.
5mm
Main halyard
3.
Make a figure 8 knot 20 cm below the other end of the
main halyard.
4.
Push the knot into the sail groove and drag the line
through the mast.
1.
If you have a spinnaker, do chapter spinnaker halyard
first.