Chapter 3 Transportation and Storage of Product
4
Chapter 3 Transportation and Storage of Product
This chapter describes the transportation and storage of this product.
3.1. Transportation
• Transport the product in an appropriate manner according to the weights indicated in the separately provided
“External dimensions” drawings and specifications.
• If the reduction gear needs to be lifted after unpacking, also refer to “4.4 Lifting of this product”.
• For the catalog products described in “2.2. Parts codes of catalog products”, refer to the weights of the
reduction gears listed in Table 3-1.
• Do not stack the packing boxes containing this product too high.
• Avoid excessive impact or vibration of the reduction gear.
Table 3-1
Model
Weight (kg)
Model
Weight (kg)
RV-25N
3.8
RV-125N
13.9
RV-42N
6.3
RV-160N
22.1
RV-60N
8.9
RV-380N
44
RV-80N
9.3
RV-500N
57.2
RV-100N
13.0
RV-700N
102
If the packing boxes containing the reduction gear are stacked too high during transportation, they
may collapse and fall down, and cause injury or damage to the reduction gear.
Applying excessive impact or vibration to the reduction gear could cause damage to the reduction
gear.
Each weight listed in the above table, as well as in the separately provided “External dimensions”
drawings and specification sheet, indicates the weight of the reduction gear only. It does not include
the weight of the packing box or optional parts, etc.
The actual weight of the reduction gear may slightly differ from that listed in the above table,
depending on the specifications.
Note
Important
