13
ALLUX
TM
User’s Guide
States of ALLUX
TM
States of ALLUX
TM
6
6
6.2 Normal use state
6.2.1 When battery charger or power OFF cap is disconnected
When the battery charger (NE-BC01) or the power OFF cap (NE-CC02) is disconnected,
ALLUX
TM
will enter the normal usage condition, and the vibration will activate to indicate
the residual capacity of the internal power supply of ALLUX
TM
. After removing the battery
charger and power OFF connector, connect the charging port cap (NE-CC01).
●
Disconnect the battery charger or the power OFF cap. When the vibration does not sound
as below, connect the battery charger or the power OFF cap and disconnect it again.
6.2.2 When power is turned off for charging
The power supply turns off when the battery charger or power off cap are connected.
●
Connect the battery charger
●
Connect the Charging port cap.
0.25
sec
×
8
times
:3hours or more
0.5
sec
×
8
times
:Less than 3hours
2
sec
0.75
sec
8
times+
(4
sec
)
:No more walk
After disconnecting the battery charger, connect the charging port cap.
(NE-CC01). If the cap is not used and the connector terminal comes
into contact with water or another liquid, ALLUX
TM
may malfunction
and enter the charge mode, and you cannot walk and may be stranded
in a dangerous place.
Do not walk with the power OFF cap (NE-CC02) connected. Walking
control ceases and thus if you attempt to use the unit while connected it
could impair the walking process and result in a fall.
WARNING
Charging port cap
NE-CC01
Power OFF cap
NE-CC02
WARNING
Summary of Contents for ALLUX NE-Z41
Page 43: ...MEMO ...
