background image

 

 

 

28 

 

The  internal  helmet  components  are  not  and  cannot  be  waterproof.  Consequently,  any 
improper  exposure  to  rain,  humidity,  food  spillages  or  other  liquids  can  result  in 
damages  to  the  N-Com  electronic  devices,  damages  for  which  Nolangroup  shall  not  be 
responsible. 

 

This  warranty  does  not  include  those  parts  subject  to  wear  and  tear  such  as,  for 
example,  the  rechargeable  battery  and  the  cables  used  for  connection  between  the 
various N-Com systems or between the N-Com systems and other devices. 

 

Since Nolangroup does not supply the system on which the cell phones work, it shall not 
be  responsible  for  the  operation,  availability,  coverage,  services  or  range  pertaining  to 
the aforementioned system. 

 

Whenever the product is used in conjunction with accessories or equipment not supplied 
by  Nolangroup,  Nolangroup  shall  not  guarantee  proper  operation  of  the  product/device 
combination,  nor  will  it  accept  requests  for  repairs  or  replacements  under  warranty  in 
case the product is used in such a way. 

 
Nolangroup shall not be responsible in case the product presents limited capabilities due to 
the  operating  mode  of  cell  phones  or  of  other  accessories  or  equipment  not  supplied  by 
Nolangroup. 
Tampering  with  the  internal  electronic  card  or  with  other  parts  of  the  N-Com  system  shall 
invalidate the warranty. 
Moreover,  the  defects  covered  by  this  warranty  do  not  include  all  those  specific  and 
subjective  situations  that  may  come  up  during  the  active  use  of  the  helmet  such  as,  for 
example, comfort problems while riding or aerodynamic noises. 
 
Nolangroup  shall  not  be  held  responsible  in  any  case  for  incidental  or  consequential 
damages  (including,  without  any  limitation  whatsoever,  damages  to  one  or  more  persons) 
resulting  from  non-fulfillment  of  the  obligations  arising  from  this  warranty  as  it  pertains  to 
Nolangroup products. 
 
8.3.

 

Validity of this limited warranty 

This  warranty  is  valid  only  if  the  enclosed  warranty  form  is  duly  and  completely  filled  out 
with the following information: 

 

Product identification code 

 

Name and stamp of the authorized dealer. 

 

Product purchase date. 

 

Buyer’s name and address. 

Summary of Contents for basic kit 2

































Reviews: