10
3.2.
Installation of Basic Kit2 for the modular helmet N102
Fig. 6
Fig. 7
Open the helmet chin guard.
Remove both cheek pads, right and left, from the helmet (fig. 6).
Remove the Noise Reducers from the two cheek pads, and tear off the pre-cut
plastic inserts. (fig. 7)
Fig. 8
Fig. 9
Remove the rear part of the comfort padding, pulling on the neck roll until it
separates from the shell. Temporarily put the padding back inside the helmet
(Fig. 8).
Remove the “N-Com” protection cover located on the left side of the helmet (fig.
9).