Mewa
Ver. 2 z dn. 2020-05-29
P a g e
|
31
19.
Re-use
The product is suitable for reuse.
All reusable products are subject to a particular burden.
Therefore, their features and performance may deviate from the new product to such an extent that the
safety of patients and third parties during their use is at risk.
The product with proper care and maintenance retains its quality for a period of 3 years and this is the
expected period of its use.
For secondary use, please:
o
Remove all upholstered parts and replace them with new ones.
o
The stroller frame with wheels and steering elements should be thoroughly cleaned and
disinfected with commercially available cleaning and disinfecting agents.
o
The product must then be checked by an Authorized Service Center (see Chapter 25) or the
Manufacturer for wear and damage.
o
All worn parts and components that do not match or are unsuitable for the user should be replaced
with new ones.
o
The product prepared in this way can be put back into use.
20.
Service and periodic inspections
For safe and trouble-free use of the Yeti stroller, it must be regularly and thoroughly inspected and
serviced as indicated in the table below.
In a situation where the stroller user is not able to carry out the activities himself, he should return the
stroller to a specialized stroller service point or directly to the Manufacturer, who will properly review and
will perform necessary service activities. These activities may be charged extra.
All repairs should be carried out in specialized, authorized Services (see point 25) or directly at the
Manufacturer.
Only original spare parts that are supplied or recommended by the Manufacturer may be used in the
stroller.
Service should be performed:
•
Each time before using the stroller
o
Check the efficiency of the central brake - After activating the central brake, both rear
wheels of the stroller should be locked and cannot rotate.
o
Check the attachment of structural elements - It is necessary to check all mechanisms of
the stroller and its movable elements, in particular, pay attention to: the correct mounting
of the therapeutic seat with the backrest to the stroller frame, the correct mounting of all
four wheels, the correct functioning of the five-point seat belts, properly locked seat angle
adjustment mechanism, properly locked backrest angle adjustment mechanism and
footrest correct mounting.
o
Check the condition of the tires - Check that the tires on all four wheels are not damaged
or worn.
o
Inspection of solid frame parts, seat with backrest and footrest frame - Visually inspect the
condition of the structural profiles. These elements must not be damaged or cracked.
•
Every one month
