Mewa
Ver. 2 z dn. 2020-05-29
P a g e
|
15
9.
Configuration and use
–
stroller frame
Frame folding mechanism
The frame folding mechanism is located inside the frame and on the frame
in two places in its right part and in three places in its left part. Describing
these places from above, from the side of the handle to push the stroller,
these are:
•
right and left bend - an element that allows folding the upper
frame to reduce its dimensions
•
mechanism of folding the frame with a lock
Unfolding the stroller frame. Transport lock.
To unfold (open) the stroller frame: lay the
stroller frame horizontally on the ground and
pull off the transport lock (Fig. 9.2.1). Then
gently pull the backrest to the upright position
(Fig. 9.2.2.). To set the stroller, pull the handle
carefully by lifting it slightly up while bringing
the stroller to the desired position until the
frame folding lock engages. The frame of the
stroller will not unfold properly until the frame
folding mechanism has been properly closed.
This is evidenced by the clear "click" sound
coming from the well-closed mechanism of
folding the frame
Folding the frame
To fold (close) the stroller frame: push the small,
red button (Fig 9.3.1) and release the frame folding
mechanism lock by pulling it up and pull both frame
folding handles up (Fig 9.3.2) until the frame is
released. Then fold the stroller frame folding it
forward in the direction of the front wheels. Make
sure that the push handle and footrest are in a non-
colliding position. Then pull the backrest release
mechanism. Put on a transport lock.
Fig 9.1
Places of folding/unfolding
Fig. 9.3.1
Fig. 9.3.2
Red button
Folding frame mechanism
Fig. 9.2.1
Fig. 9.2.2
Transport lock
Unfolding the
frame
