Mewa
Ver. 2 z dn. 2020-05-29
P a g e
|
23
12.
Additional equipment
Adjustable head supports -
↔ and ↕
To adjust the head support, draw aside the seat upholstery
on the front and back of the seat. Next, take off the head
support knobs, which are situated on the back of the seat and
adjust the head supports at the front of the seat. That
accomplished, screw the knobs back in the appropriate place
at the back of the seat. Finally, draw the upholstery at front
and back of the seat.
Fig 12.1
Adjustable chest and loin pads -
↔ and ↕
To adjust the chest and loin pads, draw aside the seat
upholstery on the front (Fig 12.2.1) and back of the seat (Fig
12.2.2). Next, take off the chest and loin pads knobs, which
are situated on the back of the seat (Fig 12.2.3) and adjust the
chest and loin pads at the front of the seat. That accomplished, screw the knobs back in the appropriate
place at the back of the seat. Finally, draw the upholstery at front and back of the seat. (Fig 12.2.4)
Fig 12.2.1
Fig 12.2.2
Fig 12.2.3
Fig 12.2.4
Unfasten the upholstery at both sides / Release the knobs / Fasten the upholstery
Therapeutic table
The Mewa stroller can be equipped with a non-slip therapeutic
table with a maximum load of 3kg.
–
Fig.12.3.
The therapeutic table is mounted with the same fixings as the
safety barrier so you cannot use both of these elements at the
same time.
Slide the table
into the attachment tubes and listen for the ‘click’.
To assemble the table, slide them onto the frame, latch. The table
will not be properly installed until the latch engages the frame and
snaps into place. This is evidenced by the clear "click" sound
Fig 12.3
Therapeutic table
Fig 12.1
Side pads
