Mewa
Ver. 2 z dn. 2020-05-29
P a g e
|
16
Swivel front wheels, solid. Locking the direction of travel of the front wheels
The used, durable wheels guarantee the highest quality of stroller driving, driving pleasure and elegant
appearance. The tires are tubeless, filled with a special gel that has shock absorbing properties very similar
to those of inflatable wheels. The wheels are factory-fitted to the front wheel forks, which are finished
with top steering axles from above.
Both front wheels can be set for straight-ahead or unlocked for turning, which makes it much easier to
maneuver the stroller. Thanks to the locking of the direction of travel of the front wheels and the
possibility of putting it on or taking off, there is clearly greater comfort for both the child and the assistant
when driving the stroller.
It is recommended to remove the lock and allow the front wheels to turn while driving the stroller on a
completely smooth surface, e.g. in shopping centers, school.
•
Assembly
. To attach the wheels, insert the wheel axle into the folding system slot until you hear
a ‘click’. The audible clicking sound is the
indication that the assembly has been done
properly. For dismantling the front wheels
press the button on the front wheel folding
system (Fig. 9.4.1 ) and eject the wheel axle
from the front wheel folding system slot.
•
Direction lock.
In the event of uneven
surfaces, moving on sloping surfaces, when
crossing
thresholds
or
curbs,
it
is
recommended to install the lock and block
the turning of the front wheels. To block the
front wheels, turn the lock knob left. Turn the
lock knob right, to unlock. (Fig.9.4.2)
Rear wheels, solid. Installation and removal of rear wheels on
the axle
The used, durable wheels guarantee the highest quality of stroller
driving, driving pleasure and elegant appearance. The tires are tubeless,
filled with a special gel that has shock absorbing properties very similar
to those of inflatable wheels.
Thanks to the possibility of dismounting both the wheels and their axle,
the trolley is smaller after folding, which facilitates its transport and
storage.
The wheel assembly mechanism is mounted inside the rear wheels and
ensures quick assembly and disassembly of the rear wheels. It is started
by pressing the quick assembly clamp (Fig. 9.6.1) towards the center of
the wheel, after which the rear wheel can be mounted on the rear wheel
axle or the rear wheel can be removed from the rear wheel axle.
•
Assembly. When installing the rear wheel on the rear wheel axle, press the clamp in the center
of the wheel and put the wheel on the beginning of its axle. Then stop pressing the clamp and continue
Fig 9.4.1
Quick release button
Fig 9.4.2
Direction lock knob
Fig 9.5.1
Quick mount buckle
