Mewa
Ver. 2 z dn. 2020-05-29
P a g e
|
27
•
User manual with warranty card
Before use, check and make sure that the carton contains all the elements and none of them has been
damaged, e.g. during transport. In the event that it is found that in the carton received is missing or
damaged any component, contact the Seller and the Manufacturer in order to receive the missing
elements or replace the product with a new, fully complete and functional.
The multifunctionality and extensive equipment of the Mewa stroller allow you to tailor the stroller to
your personal requirements. To do this, read the entire manual carefully before use.
No tools are required to assemble and disassemble the Mewa stroller.
A Phillips screwdriver is required to adjust the height of the footrest. An Allen key is needed to adjust the
backrest height and seat depth.
15.
Assembly and disassembly of the stroller
•
Stroller assembly
. The product pre-packed in the original carton is already pre-assembled.
Complete the installation by completing the following steps:
a)
mount the rear wheels on the axle
b)
unfold the stroller frame with a footrest adjusting the parameters:
o
enable/disable lock of the direction of travel of the front wheels
o
adjust the height and angle of the stroller push handle
o
adjust the seat tilt angle
o
set the tilt angle of the backrest
o
adjust the length of the five-point belts
o
adjust the height of the footrest and the tilt angle of the footrest
c)
install appropriate accessories and adjust parameters, for example:
o
adjust the usable width and depth of the seat (set minimizing kit)
o
install a safety barrier or a therapeutic table
o
adjust the deflection and stabilization belts
o
adjust the canopy with the window
o
install and adjust the wedge
o
put on a travel bag
o
put on a shopping basket
o
put on selected items of equipment dedicated to the seasons: winter sleeping bag,
winter gloves, mosquito net, raincover, umbrella
•
Dismantling the stroller
. In order to dismantle the stroller, it is necessary to:
a)
remove the optional equipment
b)
unclip the seat from the frame of the stroller
c)
lock the front wheels, fold the footrest and stroller frame
d)
unclip the rear and front wheels
e)
fold in the stroller closing it with the transport lock
