Mewa
Ver. 2 z dn. 2020-05-29
P a g e
|
17
sliding the wheel onto its axle until it clicks. The correct wheel
placement is demonstrated by the clear "click" sound coming from
the quick axle rear axle mounting mechanism.
•
Dismantling the wheels from the axle. In order to remove the
rear wheel from the rear wheel axle, press the clamp in the middle of
the wheel and slide the wheel out of its axle.
–
Fig 9.5.2.
Rear wheel amortization system
The stroller is equipped with spring-loaded cushioning of the frame
and rear wheels, located at the ends of the rear legs of the frame,
when in contact with the crossbeam. Amortization works
automatically. The adjustment is done by activating the up-down
lever located from the bottom of the shock absorber. In order to
facilitate the switchover of settings by the lever, simultaneous
pressure on the shock absorber spring is allowed. When the lever is
shifted, the shock absorber spring will be compressed (option for hard
ground) or extended (soft ground).
Ergonomic handle for pushing the stroller. Mechanism and angle adjustment of the handle
The handle is used to push the stroller, providing a firm grip in
various driving conditions. It has the ability to adjust the height of
the handle for the child's assistant who drives the stroller - Fig. 9.7
•
Adjustment mechanism. These are two buttons on the
outside of the frame, located on the joints of the handle to push
the stroller.
•
Angle adjustment of the stroller push handle. To change
the angle of the stroller push handle, push both buttons of the
angle adjustment mechanism of the push handle and change its
angle. After setting the handle in the correct position, stop
pressing the buttons, which will automatically lock the push
handle in the desired position.
Fig 9.6
Wheel amortization system
Fig 9.7
Handle angular adjustment
Fig 9.5.2
Wheel disassemble
