2014 Mytrix Technology
All rights reserved Third Version
37
10. Outer shell speed: the speed of print wall, slow print can make the wall print better.
Effect:
Slow down the print speed of wall, the surface will be smoother.
11. Inner shell speed: the speed of the print in wall. Higher speed can shorten the print
time.
Effect:
Speed up the in wall print can shorten the print speed.
12. Minimal layer time: the minimum print time of each layer, if print too fast, the
machine will slow down according to the minimum print time of that layer to ensure
enough cooling time.
Effect:
Control the minimum print time of each layer to ensure enough cooling time.
13. Enable cooling fan: open the nozzle cooling fan to speed up the cooling.
Effect:
It is used to speed up the cooling while printing, the print effect will come out
better. Careful use for ABS, it is easy to rip off.
7.3.3 Print Screen
Load model
save model
save to SD card
USB network print
Rotate
Automatically lay flat the model
reset the model
Rotate the model
Left mouse button click the circle and drag, the model can rotate to any direction with
the mouse
