2014 Mytrix Technology
All rights reserved Third Version
35
for gravity reason. Therefore, a support is needed. But not for all.
None: no support is needed.
Touching build plate: support from outside, only add support for the overhang part
outside of the model.
Everywhere: add to every part of the model as long as it is overhang, including inside
of the model.
Effect:
If the model is overhang, it needs support. If not, the filament will drop during
printing.
10. Platform adhesion type: add a base and it can enhance the sickness of the print
model. None: no platform is needed. Brim: extra thick base, and attached cohesive
material around. Raft: net shape base.
Effect:
Adding a base can enhance the thickness of the platform, Raft type base save
more material.
11. Diameter: diameter of the filament.
12. Flow: the flow speed of filament while printing.
Effect:
Diameter is used in conjunction with the rate of flow. The bigger the diameter
is, the slower the filament come out. The bigger rate of flow is, the faster the filament
come out.
7.3.2 Advanced setting
1. Nozzle Size: 0.4.currently this figure is fixed.
2. Retraction speed: Speed at which the filament is retracted.
Effect:
Theoretically the faster the better, but it might possibly lead to unable to feed
filament.
