M Y O S U I T – U S E R M A N U A L
Page 34 of 53
1.
Using the Myosuit
Once the Myosuit has been donned on the user, the following procedure describes the steps
required to turn on, configure, operate, and turn off the device. Operating the Myosuit
should be done and/or supervised by trained personnel that has been certified by MyoSwiss.
The Myosuit has two main modes of operation while in use:
Configuration mode, and
Training mode.
The typical workflow when using the Myosuit is to:
1.
Turn on the Myosuit.
2.
Configure the training session.
3.
Train with the Myosuit!
4.
Turn off the Myosuit.
Turning on the Myosuit
Press the standby button on the remote. The light indicator turns blue.
The Myosuit will then perform an internal system check. During the internal check, the remote control screen
will show the Myosuit logo on the top left corner and the current version of the software on the bottom left
corner (splash screen).
Part
4
