11
STEP 3
1) Suggest assembling this step by two persons.
2) First, lift up the cover for handlebar post (48), then connect computer
cable (100 & 101) as fig.(3-3).
3) Insert the handlebar post (10) on the main frame and tighten it by using
the spring washer (7), the flat washer (8) and the allen bolt (19). Place
down the cover for handlebar post (48) and make it tight on the main
frame.
4) Assemble the handlebar welding set (28) to the handlebar post(10) by
using the spring washer (7), the flat washer (8)and the allen bolt (9) as
fig.(3-1).
5) Assemble the protective cover (27) by using the screw (118) as fig.(3-
2).
