IAN
instead of requiring compilation, the ODI
is
re-configuredby editing a text
which
is read by the program when it is started.
For complete information on how to install the ODI
driver, refer to the Novell NetWare ODI Shell for
DOS reference manual. The examples shown in
this section are provided as a general orientation for
installing the
An example of the
for a
card
configured at
slot 4 and using ethernet_802.3
frame type file
be as follows:
Other options described in the Novell documenta-
tion are not required, such as the MEM.
DMA
channel., If, however, INT and MEM settings are
specified, then the value
in
is
used. If the slot number is not specified, the
card is assumed at the first available slot.
If the slot number is mentioned, the presence of the
card is checked only on that slot.
To load and run the ODI driver there are four TSR
programs that are invoked in sequence. All mod-
ules except the module specific to the
are
provided by Novell. The
specific module
provided on the
DOS Driver Diskette, Is
named
The total load sequence,
0 1992
