For example, if
NetWare installed on hard
disk drive
in directory SERVER, and the
Diskette is loaded into floppy disk
drive ‘A’, the following commands may be used to
load the LNE390 Netware 3.1 x Server driver on the
diskette at
DOS prompt.
CD
.
COPY A:
Once this has been done, the
server may
be started by entering the command
SERVER
In order for the
driver(s) to become
and usable by the NetWare server, it is necessary
for the server to execute a ‘LOAD’ command.
There will be one LOAD command for each
operating on a unique frame type, being
supported by the network. In addition, each board
installed in the system will require one BIND com-
mand to tie a NetWare
into the
rendition of the
The syntax
LOAD/BIND command to execute
the
is shown above.
variable
symbols are described in the following table.
3-2
3.0
1992
