IAN Adaptor
When the board is in place, the notch in
top of
the bracket should line up with the screw hole for
the mounting screw. If it does not, check the
ment of the
and the depth of the connector
insertion.
Complete the board installatbn by replacing the
mounting screw. Replace the system cover as per
the manufacturer’s instructions.
As a
step, the LNE390 must be connected to
the network media.
For
5, the 15 pin D-connector Is used to
connect a standard Ethernet transceiver unit to the
For 1
2, the BNC connector is used to attach
a BNC
connector to the
The other two
poles on the
connector are attached to coaxial
cables which make up a Thin Ethernet
For
the
modular
plug is used to connect the
to a network
hub. If the LNE390 is to be connected directly to
another
Ethernet Adapter (such as an-
other
a special
that reverses the
signals is required.
Configuration Utility
Your
host system should be
with an
Configuration Utilii diskette by the system’s
manufacturer. This program allows the user to
make all of the configuration settings on the
LNE390 board, as well as any other
periph-
eral boards installed in the system, without having
to change physical switches and option jumpers,
1992
Revision 3.0
