
device, please use the specified accessories provided or recommended by the original
manufacturer.
4. The device should not be placed in wet environment or near water, nor should
they be directly exposed to sunlight.
5. Do not place the device near a strong heat source, because this may affect the life
and normal use of the device.
6. Do not use it for those have breasts prosthesis.
7. Do not use it for those have metal supports in the body (excluding IUD).
8. It should not be used during pregnancy or breastfeeding
9. Don't use it after drinking
10. Don't use it during heavy periods.
11. Do not use it within 6 months of C-section.
12. Do not use it within 3 months of miscarriage.
13. Do not use it within 2 months of natural labor.
14. In the process of operation, if the suction adjustment of the negative pressure cup
is too large, please immediately stop and adjust the suction.
15. Use with caution if sensitive to current.
1. Before treatment, please remove all metal objects from the body first.
17. Remember to add filter cotton before using the vacuum metal head to avoid the
essential oil entering and causing the instrument malfunction.
18. EMS: do not operate on the abdomen within 1 hour after meals.
19. Do not place the EMS conductive plate on the injured and inflamed muscles.
20. Do not place the EMS conduction piece on the scar area left by the recent
operation (within 10 months).
21. After the operation, scrub the instrument with normal saline to ensure its
cleanliness and extend its service life.
5.Troubleshooting & Solutions
1. The instrument can't start and the key lamp on the back of the instrument doesn't
work?
A. Ensure that the power cord is connected to a working power outlet.
B. Ensure the fuse tube on the back of the instrument is not loose or being burnt.
2. Vacuum pressure cup/metal head has no suction or less suction?
A. Check if the transparent long pipe is misconnected or not connected properly.
B. Please check and clean if there is foreign matter or grease obstruction in the
suction hole of main engine.
C. If the pipe is broken, especially at both ends, it shall be replaced.
3. No electric flow during EMS operation?
A. Check whether the connection of the wire is loose.