mychefcooking.com
PRODUCT MANUAL SNACK - DT.MP. SN.2202.2
30
7.
USE OF THE REMOTE CONTROL
7.1.
Mychef Smart Control configuration
7.1.1.
Creating a new user
The first step to configure the remote control is to create a user, with which the different
ovens to be controlled will later be linked.
Create a user via the following link or QR code:
https://mychef-432df.firebaseapp.com/
Figure 21. New user creation form
Figure 22. Authentication panel
Once in the authentication panel, select "Create account" to create a new user account.
Note: The password must be at least 6 characters long.
To link a device (mobile phone, tablet, or computer) it is first necessary to set up a Wi-Fi
connection in the oven. The following section (
7.1.2 Wi-Fi connectivity
) explains in detail
how to set up this configuration.
This web address has the functionality to send notifications when the firings
of the different linked ovens are finished, so, if you want to enjoy this
service, you must give permission to send pop-ups from this address.
