my!
WIND
Ltd.
Soola 1a
51013 Tartu, Estonia
Email: [email protected]
Website: www.mywind.ee
19 |
P a g e 2 6 / 0 7 / 2 0 1 9
Figure 17
– Repositioning the tower
Step 3: Placing the cover holders
1. Fit six M8 x 20 bolts with a spring washer and then a regular A2 washer and place the bolts to
join the three blade cover holders to the blade holder back flange (see Figure 18). Use WD-40
oil to lubricate the bolts before placing them into the threaded holes. Fix the bolts with a
torque of 27 Nm.
TIP!
Use the holes in the blade holder front flange to do the initial fixing with
a hex key.
Figure 18
– Placing cover holders
