AccessZone ® - GC500 Series – GC501-GC504 User Manual
19 Appendix B – Quick Guide:
Users must first be added to the system with an optional 4 digit user access PIN code before
access can be granted. All system commands (e.g. add user) can in configuration mode be send
from a Bluetooth enabled mobile phone as long as the user knows the 8 digit Master PIN code.
Please refer to section 7 How to Configure the System for more details about the different
commands.
19.1 Mobile Phone used for Adding and Deleting Users – Normal Operation:
The privileged users (administrators) on storage position 01 and 02 can add and delete users in
normal operation if they are added with an access PIN code.
The user is first requested the normal 4 digit access PIN code. Then it will prompt for the 8 digit
Master PIN code if the privileged user (administrator) has entered a valid “Add new User” or
“Delete User” command.
Steps:
1) Enable Bluetooth on the mobile phone and set it to hidden
2) Temporarily change the Bluetooth friendly name to the desired command:
Examples:
•
Add User
(Refer to section 8.2 Add new User Command):
Add unique user 0022b4b62918 with PIN code 1234 enter on position 1:
"
01,0022b4b62918,1234
"
or
Add unique user 0022b4b62918 without PIN code enter on position 5:
"
05,0022b4b62918,0000
"
or
Add unique user 0022b4b62918 with PIN code 1234 and strong enter on position 1:
"
01,0022b4b62918,1234,1
"
or
Add unique user 0022b4b62918 without PIN code and weak enter on position 5:
"
05,0022b4b62918,0000,3
"
•
Delete User
(Refer to section 8.3 Delete User Command):
Delete user stored on position 1 enter: "
01
" or on position 5 enter "
05
"
3) Set the mobile phone to visible
4) Enter 4 digit access PIN code on mobile phone when prompt (access is granted if correct)
5) Wait for 3 short beeps which indicate that a valid command has been found and Master PIN
code is required
6) Enter 8 digit Master PIN code on mobile phone when prompt – acknowledge with a short beep
for successful execution
7) Set the mobile phone to invisible/hidden
8) Erase the command in the mobile phone
For more commands – repeat step 1) – 7)
If no more commands are required - Set friendly name back to desired name.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
2010-07-06 US 1.17
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
www.mvc-data.com
Phone +45 25 12 84 02
32/34