AccessZone ® - GC500 Series – GC501-GC504 User Manual
8.2
Add new User Command
This command adds a new user to the system. This is also used for editing an exiting user. Make
sure to store the user on the same storage position.
This command can also be execute in normal mode by the privileged users (administrators) on
storage position 01 and 02.
Parameters
Values
Description
<Add storage position>,
2 digits
01-02
03-07
03-12
03-22
03-52
Position in system database to store the user
Privileged users (administrators): “01”-“02”
1)
Normal users GC501: “03”-“07”
Normal users GC502: “03”-“12”
Normal users GC503: “03”-“22”
Normal users GC504: “03”-“52”
Ex. position 1 is written as “01”
<BD address of new device>,
12 digits
The unique Bluetooth address of device
Valid values ‘0’-‘9’ and ‘A’-‘F’ or ‘a’-‘f’
Ex. “001256ABCDEF”, “00BB592F030B”
<PIN code for user>
4 digits
User access PIN code
2)
Ex. “1234”
Use “0000” to disables use of access PIN code
for that particular user
<power class>
(optional – not required)
1 digit
1-3
Device power class
3)
'1' = strong device
'2' = standard device
'3' = weak device.
Default: ‘2’
1)
The privileged users (administrators) must be added with a PIN code to be able to add other
users. This is a security requirement.
2)
The access PIN code must be entered within 15 seconds before it continues to scan for another
user.
3)
Can be used to compensate (normalize), in some degree, for power differences and antenna
location between the used Bluetooth keys (e.g. mobile phones):
If a device must be closer to the reader than most others before access is granted
- set parameter = '3' (weak device)
If a device gets access further away from the reader than most others
- set parameter = '1' (strong device)
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
2010-07-06 US 1.17
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
www.mvc-data.com
Phone +45 25 12 84 02
15/34