7
English
· Always hold on to the push bar of the
pushchair when your child is standing
on the Step-Up Board or when your
child is stepping on or off the Step-Up
Board.
· The child must always stand on the
anti-slip zone. You can recognise the
anti-slip zone by the black knobs.
· Always check whether the Step-up
Board is properly secured before you
use the pushchair.
· When you child is standing on the
Step-Up Board, it will ALWAYS be
located behind the insert (such as the
carrycot, pushchair insert or car seat)
and in front of the push bar. Your child
must hold on to the side tubes of the
push bar. (Figure 2)
· Depending on the insert you are using
(carrycot, pushchair, car seat…), you
must adjust the height of the push-
bar to ensure your child has sufficient
room.
· If you use the Step-Up Board in combi-
nation with the Urban Rider frame, the
wheels must NEVER be in the swivel-
ling position.
· Only use the Step-Up Board on firm,
flat surfaces, such as footpaths, and
limit the speed of the pushchair in
combination with the Step-Up Board to
walking speed.
Maintenance
· The paintwork does not require any
maintenance but is more likely to be
damaged by knocks or scrapes than
chrome is. Bear this in mind when
using a car to transport the pushchair.
· If necessary, you can spray the moving
parts with Teflon spray (dry lubricant)
and rub this in using a soft cloth.
Summary of Contents for 3RIDER
Page 2: ...1b 2 1a ...
