MUTOH XPJ-661UF, Operation Manual

Page: 38 / 174

38 Nozzle check and cleaning
Before starting everyday operation, please perform nozzle check printing to check the print head condition. If nozzle clog is
found, conduct cleaning.
This printer offers the following 2 kinds of nozzle checks:
• Nozzle Check - Prints the nozzle check patterns
"For the Nozzle Check pattern printing" P. 38
• Nozzle Check B - Prints the nozzle check patterns on the partially colored background.
"For the Nozzle Check B pattern printing" P. 39
Important!
The minimum required media size for nozzle check printing is width 260 mm x length 35 mm. If you use a media that is smaller
than this, the printing will overshoot it.
Once UV ink stains on the table, it will be cured by UV lamp and will not be removed from the table.
Nozzle check and cleaning
Note
• “Nozzle Check B” will only appear in the menu if 6-color is set.
• When using white ink, colored media, transparent films or semi-transparent films (such as OHP film, tracing paper and more) are
recommended to use for nozzle check.
1.
Run a nozzle check print
For the Nozzle Check pattern printing
[1] Load a roll media for Nozzle check.
• Load an A4 or larger size media in landscape orientation on the table.
" Loading media " P. 33
[2] Check that the message on the left is displayed.
[3]
Tap .
[4]
Tap [Enter].
• The printer will print the nozzle check pattern.
Print Ready
Type 1
Nozzle Check
Start ー＞ Enter