MUTOH XPJ-661UF, Operation Manual

Page: 113 / 174

Emptying waste ink tank 113
Note
If no or small amount of waste fluid is collected in the waste ink tank, you may not be able to drain fluid out of the tank.
[2]
Cover the floor just under the waste ink tank using a paper that you do not use.
[3]
• Wear the polyethylene gloves (white) over the plastic gloves (pink).
• Wear personal protective equipment such as goggles, protective mask or
clothing.
[4] Open the cover of the drain tube valve clamp, then unhook the drain
tube valve to take it out from the clamp.
[5]
Put the tip of the drain tube valve in the empty container and open
the drain tube valve to drain waste ink from the waste ink tank.
Important!
Waste ink may splash while draining from the waste ink tank.
Make sure to put the tip of the drain tube valve in the empty container to drain waste ink.
[6]
Once you finish emptying the waste ink tank, close the drain tube
valve.
[7] Use a dry cloth to clean the tip of drain tube valve.
+ +
Open
Close