manualshive.com logo in svg

MUTOH XPJ-661UF, Operation Manual

Share
Download
MUTOH XPJ-661UF Operation Manual Download Page 132

132     Inside cleaning

Preparation:

• Paper Towel (Lint-free cloth) or Polyester knit wiper (optional)

• Lubricating  grease

• Cleaning stick

  3.  

Table Maintenance

Important!

During cleaning, please note the followings.

• DO NOT apply lubricating grease on area other than specified.

• Always use the paper towel (lint-free cloth) supplied with the printer or optional polyester knit wiper.

DO NOT use tissue paper.

• When using this product, do not place any object in the sensing area of the obstacle detection sensor. This will cause false 

detection and the printer will not be able to print correctly.
For details, see the following section:

 

"Printing area" P. 32

Before greasing

[1]

If any media or jig is loaded on the table, open the front cover and remove it.

[2]

Check that the front cover is closed, and tap [Home].

[3]

• Use 

 to choose the menu shown left.

• Tap   

.

[4]

• Use 

 to choose the menu shown left.

• Tap   

.

[5]

Tap [Enter].

•

The table moves to the front side of the printer.

Menu3

Maintenance

Maintenance8

Table Maintenance

Table Maintenance  

Start 

 

 

ー＞ 

Enter

Please Wait

Summary of Contents for XPJ-661UF















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands