MUTOH XPJ-661UF, Operation Manual

Page: 134 / 174

134 Inside cleaning
[4] Apply the grease on the screw shaft.
• Apply it on the area where the grease was built up in Step 2.
[5]
Apply it evenly on the screw shaft.
• Using the cleaning stick, apply it towards the front to evenly grease
on the screw shaft.
After greasing
[1]
Close the front cover slowly, holding it by the place shown in the
picture.
[2]
Tap [Enter].
• The table moves up and down to smooth out the grease on the
shaft.
•
The table moves to the original position.
[3] The message on the left will appear.
• That ends the procedure.
Table Maintenance
End ー＞ Enter
Set media, then
Tap [∧] key.