Set 20: Spitting 81
Note
• Spitting is a maintenance operation for preventing clogging of the print head’s nozzles. It consumes ink.
• When Spitting is set to “Off”, nozzles will become easily clogged because spitting is not performed. In such a case, print quality cannot be guaranteed.
• When the spitting setting is “On Media”, the maximum printable media width becomes 16 mm shorter.
Therefore, the side margins become the value that you have set in Side Margin menu +8 mm.
Important!
If the number of spitting returns is set high, there is a higher chance of nozzle clogging when printing for a long time.
In such a case, print quality cannot be guaranteed.
Set 20: Spitting
Sets up the spitting operation while printing.
The display will shift to setting of the pass count only if “On” is set for “Spitting”.
Setting values
Perform the spitting operation on Spitting box
located on the origin side for every shuttle.
This is the initially set value.
Perform the spitting operation on the page
margins. The printing speed will be improved
since the number of time to return to Spitting
box is reduced.
Spitting operation is not performed.
Pass Count menu
This is for setting the interval at which the print head will carry out spitting operation.
• The head will carry out spitting operation every time it completes the number of passes
that you set here.
Setting values
<1 cnt> to 999 cnt
<> indicates the initial value.
Set 20:
Spitting
Spitting
:
On
Spitting
:
On
Media
Spitting
:
Off
Spitting
:
On
Spitting
:
On
Media
Enter
Pass Count :
1 cnt
