34 After loading the media...
[5]
Set the media holder at both edges of the media.
Important!
With the default settings, the printing operation starts 5 mm from the edge of the media. To hold down the media, make sure that
the part overlapping the media is less than 5 mm in length.
[6]
Close the front cover.
[7]
“User: Type ** OK?” is displayed on the Operation panel.
• Press the [+] key or [ - ] key on Operation panel to select the User
Type Setting.
[8]
Press the [Enter] key to execute media initialization.
• That ends the media loading procedure.
User :
Type **
OK?
Press!
