Head cleaning 119
3
Cleaning each part
To use this product always in its best condition, please clean periodically.
When nozzle missing is found in nozzle check, conduct head cleaning. Head cleaning consumes ink.
There are several cleaning modes in this product. Please use them accordingly based on your usage condition.
Important!
Comply strictly with the following when you performing “Little Charge” or “Initial Charge”. If charging is interrupted, ink will be
lost when charging is resumed.
• Do not open the Front cover or the Maintenance cover.
• Do not use ink cartridges (ink bags) that have little ink remaining.
Head cleaning
Short cleaning
Consumes less ink than Normal cleaning.
Normal cleaning
Conduct nozzle check before and after printing, and use when nozzle missing is found.
Long cleaning
Consumes more ink than Normal cleaning. When nozzle missing still occurs after Normal
cleaning, conduct Long cleaning.
Little Charge
Though much better cleaning results can be expected than Long cleaning, it consumes a
large amount of ink.
*This mode cannot be selected via the “Cleaning” key. Select it from the Cleaning submenu
in the Panel Setting Menus.
Initial Charge
Gives a rather higher cleaning effect than “LittleCharge”, but also consumes rather more ink.
*This mode cannot be selected via the “Cleaning” key. Select it from the Cleaning submenu
in the Panel Setting Menus.
Cleaning each part
