80 Set 17: White Maintenance
Note
White ink tends to settle or coagulate inside the print head or ink tubes.
Therefore, the printer regularly discharges a small amount of white ink to maintain the performance, even in standby status.
Note
With take-up system: if you want to set “Start Feed” to below 0, set “Page Gap” to “Narrow”.
f not, the Start Feed setting is not reflected properly.
"When the “Output Mode” is set to “Take Up”" P. 70
Set 17: White Maintenance
Sets up white ink’s maintenance operation.
• If you do not usually use white ink for regular printing, set to “Little” to
minimize white ink consumption in standby status.
• This menu will only appear in 6-color configuration.
Setting values
White ink maintenance operation will be
carried out at a normal frequency.
This is the default setting.
White ink maintenance operation will be
carried out at a lower frequency.
Set 18: Start Feed
You can change the margin setting between images.
• Value over 0: The margin setting between images will be wider than when setting “0”.
• Value equal to 0: The default margin setting between images will be applied.
• Value below 0: The margin setting between images will be smaller than when setting
“0”.
Setting values
-10 mm to <150 mm> to 500.0 mm
<> indicates the initial value.
Set 19: Initialization
Returns the settings of the printer to default.
Submenus
For initializing the settings of all the menus.
Initializes the settings in the User Type menu.
Set 17:
White Maint.
White Maint. :
Normal
White Maint. :
Little
Set 18:
Start Feed
Start Feed :
150 mm
Set 19:
Initialization
Init :
ALL
Init :
UserType
