MUTOH ValueCut II Series, User Manual

Page: 97 / 112

ValueCut USER MANUAL FlexiSTARTER Quick Start Guide
97
VC2E-A-00
8.10 Cut Contour
8.10.1 Image Print
Print on a printer registered in a computer from the FlexiSTARTER ValueCut Edition. Select "Print…"
from the File menu and print cutting data of the cut contour. As to the printing procedure, refer to the
printer manual you use.
8.10.2 Cut contour window
Select "Cut Contour" from the File menu, then the Cut Contour window may open.
It has three tabs.
General tab

Set up:

Material size

Position
Option tab

Set up a cutting of the ValueCut like the driver options.
Advanced tab

Set up applicative cutting job.