ValueCut USER MANUAL
Control Panel
45
VC2E-A-00
Set
Communication
To build up the communication between host computer and
cutter.
Baud Rate
is to determine the speed of data transmission.
Data Bits
refers to the size of one block of data.
Parity
is used to check if data was revived correctly or not.
9600, n, 7, 1, p
9600pbs, 7 Bits with NO Parity
9600, o, 7, 1, p
9600pbs, 7 Bits with ODD Parity
9600, e, 7, 1, p
9600pbs, 7 Bits with EVEN Parity
9600, n, 8, 1, p
9600pbs, 8 Bits with NO Parity
9600, o, 8, 1, p
9600pbs, 8 Bits with ODD Parity
9600, e, 8, 1, p
9600pbs, 8 Bits with EVEN Parity
19200, n, 7, 1, p 19200pbs, 7 Bits with NO Parity
19200, o, 7, 1, p 19200pbs, 7 Bits with ODD Parity
19200, e, 7, 1, p 19200pbs, 7 Bits with EVEN Parity
19200, n, 8, 1, p 19200pbs, 8 Bits with NO Parity
19200, o, 8, 1, p 19200pbs, 8 Bits with ODD Parity
19200, e, 8, 1, p 19200pbs, 8 Bits with EVEN Parity
9600,N,8,1
,p
DHCP
Shows your IP address for TCP / IP Configuration.
Disable
IP Address
Shows the IP Address of your cutting plotter.
MAC Address
Shows the MAC Address of your cutting plotter.
Firmware
Version
To display the version number of Firmware and FPGA code.
Select
Language
To select displayed languages on LCM panel in English,
Spanish, Italian, Deutsch, Japanese, Portuguese, Polish,
Turkish or French.
English
Select Units
Provide two-unit systems for users convenient.
Metric(cm/g)
Unit(inch/g)
Unit(cm/oz)
English(inch/oz)
Metric
Image Scale
Length
To adjust the scale of media length and width that may cause
by the thickness of the media.
The Denominator is the actual length, and the Numerator is
the ideal length measured from the resultant.
For example, cutting a line with 500.0 mm length. The
procedure as follows:
1. Press the [LEFT ARROW] to choose the Numerator and
select 500.0 mm,
2. Cut the length by sending a graph file
,
3. Measure the length then use the [RIGHT ARROW] key to
choose the Denominator, then
4. Press [UP ARROW /DOWN ARROW] to change the values
of the actual length.
250 mm /
250 mm
500 mm /
500 mm
750 mm /
750 mm
250 mm /
250 mm
Image Scale
Width
AAS Length
Scale
Fixed scaling, for maintenance only.
80% - 120%
100%
AAS Width
Scale
Summary of Contents for ValueCut II Series
Page 60: ...Automatic Aligning System ValueCut USER MANUAL 60 VC2E A 00 Figure 5 1 Figure 5 2...
Page 111: ......
Page 112: ......
