User’s Guide Spitfire 65/90 Extreme
131
AP-75197– Rev. 1.2
(4) The printer does not print and an error is generated after data has been sent from a computer.
N°
Possible cause
Solutions
References
1
The model setting of the computer
is not correct.
Make sure that the model
settings on computer and
printer are the same.
Refer to Connecting the printer to
your PC
2
The interface setting or command
mode on computer and printer do
not match.
(5) Printouts are partially blurred or missing.
Notes
You may not obtain reasonable quality with media other than recommended media.
N°
Possible cause
Solutions
References
1
The media is damped.
Replace with new media.
Refer to Replacing media
2
You used folded, creased or curled
media.
3
Check the media for curling or lift
off.
Use the recommended
media.
When using media other
than recommended
media, set the following
items in the media setting
menu.
Media
HeadHeight
Stiff
Refer to Media type
Refer to Menu Overview
(6) Printing position is not correct (some positions are not printed.)
N°
Possible cause
Solutions
References
1
The loading position of the media
is not correct.
Load the media correctly.
Refer to Loading media
2
You used the scale or mirror
setting.
Turn off the scale or
mirror setting, or make the
setting again.
Refer to Menu Overview
3
You set the origin or starting
position.
Turn off the origin or
starting position setting, or
make the setting again.
Refer to Menu Overview
Summary of Contents for Spitfire 65 Extreme
