User’s Guide Spitfire 65/90 Extreme
CHAPTER 6 : PRINTER MENU
81
AP-75197– Rev. 1.2
6 .4.2.2 [F 2]- C lea ning
While printing, it could be possible that some nozzles drop out, in that case, perform a little, normal or
powerful cleaning.
Please follow the steps below to perform a cleaning.
When there are some missing nozzles, a cleaning should be done. Depending on the quantity of missing
nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.
Step 1 :
Press the [F2] key of the operation panel to shift to the cleaning menu.
Step 2 :
Press the [F1] key or the [F2] key on the operation panel.
The product will perform following operations:
Setup items
Key name
Parameters
Description
Cut & Feed
F1
ALL, Pump 1 Pump 2
Clean ALL heads or head couple one (pump 1) or
two (pump 2)
F2
Little, normal, powerful
Set the intensity of a cleaning
Step 3 :
Press the [ENTER] key to start the requested cleaning.
6 .4.2.3 [F 3]- A dj
usthea t
ers
While printing, the heater values can be changed. For example: when noticing cockling.
Please follow the steps below to adjust the heater temperatures.
Step 1 :
Press the [F3] key
Step 2 :
Following screen will be displayed
Step 3 :
Change the value of one or more heaters or switch them all off.
Notes
For more details about heater adjustment, please refer to “Controlling the heater elements on
the Spitfire Extreme printer”
Summary of Contents for Spitfire 65 Extreme
