User’s Guide Spitfire 65/90 Extreme
CHAPTER 3 :Basics
41
AP-75197– Rev. 1.2
Notes
When a cleaning cassette is empty during LongStore procedure, remove the empty one and
replace it by a new one. Only the last cycle will be repeated. Although, the full time (19 minutes)
is mentioned again on the panel.
After powering OFF the machine, the tubings in the waste bottle should be mounted on the nipple plate at
the bottom of the machine. This to prevent air is coming in the ink system which will dry out the heads.
1
Nipple plate
3.9.2 Starting up after a LongStore
Step 1 :
Power ON the machine.
Step 2 :
Go to H. Unlock (SetupMenu 6/7
H. Unlock
Yes
F2).
Step 3 :
Moisten the caps with Mutoh Mild Solvent cleaning liquid.
Step 4 :
Remove the Mutoh cleaning cassettes.
Step 5 :
Insert Mutoh Mild Solvent (Plus) Ink Cassettes in the correct order.
Step 6 :
Perform an Ink Load.
Step 7 :
Perform a nozzle check and necessary cleanings until all nozzles are present.
Step 8 :
Ready to print.
Summary of Contents for Spitfire 65 Extreme
