Waste ink accumulates in the waste box at the back of the printer. When the
waste box is full, "Full Waste Ink Tank" is displayed and printer's printing oper-
ation ceases. The waste liquid absorbent sheet/waste liquid box must be
replaced.
• The used waste liquid absorbent sheet and waste liquid box
(case) should be disposed of as non-combustible material in
accordance with your local civic regulations.
• It would dangerous for children to lick or swallow the
absorbent sheet filled with waste liquid, so dispose of it
promptly or put it out of reach.
• If you accidentally touch the waste liquid, wash with soap and
water at once.
• If it should enter your eye, wash with plenty of water and see a
doctor. If it is licked, gargle with water and wash out straight
away. If it is swallowed, immediately drink plenty of water and
consult a doctor without delay.
If this message appears you
should prepare as replacement
waste liquid absorbent sheet/
waste liquid box.
If you continue with this message displayed
Printing stops when this mes-
sage appears. Therefore it will
not be possible to continue to
use the printer unless the waste
liquid absorbent sheet/waste
liquid box is replaced.
• If the waste box has been pulled out by mistake, leave the
"Change Tank? No" display as it is and press [ENTER].
• Leave the printer switched on while you replace the waste liq-
uid absorbent sheet/waste liquid box.
Replacing Waste Liquid Absorbent Sheet(Waste Box)
84
RJ-6000 Series USER GUIDE Basic Edition
CAUTION
C h e c k
W a s t e
I n k
F u l l W a s t e I n k T a n k
NOTE
