Installation Guide Blizzard
62
AP-75261 – Rev. 2.0 – 19/12/07
Adjustment procedure
Please follow the instructions below to perform the micro shift.
Step 1 :
LOOSEN the screws (1) fixing head 5-8.
These heads have to be shifted
1
/
720
inch. In general, the µ-shift can be accomplished by turning
screws number 3 (see drawings) both by 1/4 of a turn counter clock wise!
This is only a rough adjustment!!
1 = Screws (M2.5x5) fixing the head stationary plate
2 = Angle Adjustment screw
3 = Front and Back adjustment screw
Notes
•
This image is only intended for visual support, do not disassemble the heads. Only loosen the two
indicated screws.
Step 2 :
Tighten the screws (1) fixing head 5-8
Step 3 :
Print the file once again.
Step 4 :
Check if nozzle row 6A is shifted
1
/
720
inch compared with nozzle row 3A which means that nozzle
row 6A has to be positioned exactly between 3A en 4B. Please refer to the picture below for
visual support.
4B 3B 2B 1B
3A
3A
6A
6A
8B 7B 6B 5B
Step 5 :
Adjust head 6 until it is well positioned.
Step 6 :
Adjust head 5, 7 and 8 until there are in one line with nozzle row 6B and between 6A.
Step 7 :
After this adjustment, head block 5-6-7-8 is shifted
1
/
720
inch with head block 1-2-3-4
Summary of Contents for Blizzard
