19
RAPID REPAIR WRIST SEAL INSTRUCTIONS
An online video tutorial of this procedure is available for viewing at
mustangsurvival.com. It may be helpful to watch this video in addition
to the instructions below.
ASSEMBLE MATERIALS
Make sure that you have all of the necessary equipment and materials
to perform the wrist seal replacement correctly.
You will need ONE of the following tool kits:
Rapid Repair Neck and Wirst Seal Tool Kit (Part# RE0001)
OR
Rapid Repair Wrist Seal Tool Kit (Part# RE0003)
& Rapid Repair Hand Iron (Part# RE0004)
Tools and Equiptment Supplied by User:
Light work gloves
Additionally you’ll need ONE of the following Rapid Repair
Wrist Seals:
SEAL PART#
SEAL DESCRIPTION
COMES STANDARD
WITH SUIT SIZES
RE0008-M
Rapid Repair Rubber Wrist Seal, Thin, Medium
XS-3XL
RE0008-S
Rapid Repair Rubber Wrist Seal, Thin, Small
-
RE0009-L
Rapid Repair Neoprene Neck Seal, Large
XL-3XL
RE0009-M
Rapid Repair Neoprene Neck Seal, Medium
M-L2
RE0009-S
Rapid Repair Neoprene Neck Seal, Small
S
HEAT REMOVE CURRENT WRIST SEAL
The wrist seal in your current dry suit can be removed by using a
simple heating method with a Mustang Hand Iron. All steps should be
practiced prior to applications with heat.
1. Preheat the iron to its maximum temperature, approximately 310 ºF.
2.
Roll the jig to form the smallest possible diameter. See Figure 28.
3. Place the jig inside the suit. See Figure 29.
4. Center the jig about the seal and fabric interface.
